C# Standard Tuning

Mic off

C# standard C♯ F♯ B E G♯ C♯

Uses your microphone. Nothing is recorded or sent anywhere.

Tuning

Pitch

Normal

Strings

Detect string

A4 calibration

440Hz
  • Space Start / stop
  • 1-6 Play a string
  • A Auto detect

C# standard, also called step and a half down tuning, lowers every string by three frets. You keep every shape from standard tuning and get a dark, heavy sound that sits between D standard and C standard.

What is C# standard tuning?

Each string drops a step and a half: E becomes C#, A becomes F#, D becomes B, G becomes E, B becomes G# and the high E becomes C#. Because every string moves by the same amount, chords, scales and riffs use exactly the same shapes as standard tuning, just three frets lower in pitch.

Tony Iommi tuned this low on Black Sabbath's Master of Reality, partly to ease the tension on his injured fingers. The strings are quite loose three frets down, so most players move to a heavier set of strings to keep the low C# tight and stop them from buzzing.

C# standard tuning notes

C# standard from the thickest string to the thinnest is C♯ F♯ B E G♯ C♯. The frequencies are for standard pitch, A4 = 440 Hz.

StringNoteFrequency
6th (thickest)C♯269.30 Hz
5thF♯292.50 Hz
4thB2123.47 Hz
3rdE3164.81 Hz
2ndG♯3207.65 Hz
1st (thinnest)C♯4277.18 Hz

How to tune to C# standard

Start from standard tuning (E A D G B E) and change 6 strings:

  1. Lower the 6th string (E) a step and a half to C#.
  2. Lower the 5th string (A) a step and a half to F#.
  3. Lower the 4th string (D) a step and a half to B.
  4. Lower the 3rd string (G) a step and a half to E.
  5. Lower the 2nd string (B) a step and a half to G#.
  6. Lower the 1st string (E) a step and a half to C#.

The tuner at the top of this page is already set to C# standard. Press the mic button, play each open string and let it ring, then turn the tuning peg until the string lights up green. When you lower a string, go a little below the note and tune back up to it so it stays in tune.

Why guitarists use C# standard

  • A dark, heavy sound with no new shapes to learn.
  • A favorite for doom, stoner and alternative rock riffs.
  • Looser strings make bends easier and give singers a lower range.

Guitarists who play in C# standard

These players built heavy riffs and whole albums around C# standard.

Tony Iommi playing guitar on stage

Tony Iommi

“Into the Void” Black Sabbath, 1971

On Master of Reality Iommi tuned down three half steps to C# F# B E G# C#, partly to ease string tension on his injured fingers, and it gives Into the Void its weight.

Photo: Shane Hirschman, CC BY-SA 2.0, cropped

Billy Howerdel playing guitar on stage

Billy Howerdel

A Perfect Circle

Howerdel fixed up a repaired Les Paul, tuned it to C# standard and started A Perfect Circle with it.

Photo: Marc Blair, CC BY-SA 2.0, cropped

Carrie Brownstein playing guitar on stage

Carrie Brownstein

Little Rope Sleater-Kinney, 2024

Brownstein says the band tunes to C#, which creates a sourness they lean into on records like Little Rope.

Photo: Rock Cousteau, CC BY-SA 2.0, cropped

Pepper Keenan of Down playing guitar on stage in Milan

Pepper Keenan and Kirk Windstein

NOLA Down, 1995

Down used C# standard from their debut NOLA, later adding B standard and drop A, all on 6-string guitars.

Photo: Fabio Visconti, public domain

Related guitar tunings

C# standard tuning FAQ

How do I tune to C# standard tuning?

Start from standard tuning (E A D G B E). Lower the 6th string (E) a step and a half to C#. Lower the 5th string (A) a step and a half to F#. Lower the 4th string (D) a step and a half to B. Lower the 3rd string (G) a step and a half to E. Lower the 2nd string (B) a step and a half to G#. Lower the 1st string (E) a step and a half to C#. The tuner on this page is already set to C# standard, so play each string and turn it until it lights up green.

How do I get back to standard tuning?

Raise the 6th string from C# back to E. Raise the 5th string from F# back to A. Raise the 4th string from B back to D. Raise the 3rd string from E back to G. Raise the 2nd string from G# back to B. Raise the 1st string from C# back to E. Or pick Standard under the tuner and tune each string until it turns green.

Is C# standard the same as Db standard?

Yes. C# and Db are the same note, so C# standard, Db standard and step and a half down tuning all mean the same thing: every string tuned three frets lower than standard.

What is the difference between C# standard and Drop C#?

Both have a low C# on the 6th string. In C# standard every string goes down a step and a half. Drop C# only lowers the top five strings a half step, so they sit higher: C# G# C# F# A# D#.