Black Friday Sale Lock in 40% off Premium

Watch the full lesson with Premium

  • Full lesson video (3:50)
  • Part 2 of 4 in Recording Modern Metal
  • Access to all 2,300+ lessons
Get 40% off Premium

Premium from $10 $6/month. Sale ends Nov 30

Recording Modern Metal: Tone

The tone settings I use are in relation to an amp modeler but some of the same principals can be used in the live micing of an amp.

For metal guitar tone, I've chosen a mesa dual rectifier style amp with a 4x12 Marshall style cab which is being miced with a ribbon 121 (which is modeled after a Royer R121 microphone). There is also an SM57 model mic but I prefer the R121 because there's a little more low end.

In front of the amp, I'm using an overdrive that is modeled after an Ibanez Tube Screamer and a noise gate. Both the amp and the overdrive pedal have very low gain settings with the amp at about 9 o’clock and the pedal at the lowest gain setting.

Besides that I also use a Para EQ at the end of the chain. The EQ is where I really dialed in my tone. I experimented until I found something I like and now use it on every single tone patch.

For leads, I simply rolled back the noise gate a little bit and added a delay.

As for bass, I've used a lot of the same things I used for guitar.

For metal I prefer a bass tone that has a little bit of bite so I've added a compressor and a tube screamer to the front of the chain. I'm using a Fender style amp with an 8x10 cab and again I'm using the R121 mic and the same exact Para EQ setting.