AGCFAD Tuning

Mic off

AGCFAD A G C F A D

Uses your microphone. Nothing is recorded or sent anywhere.

Tuning

Pitch

Normal

Strings

Detect string

A4 calibration

440Hz
  • Space Start / stop
  • 1-6 Play a string
  • A Auto detect

AGCFAD is a Periphery tuning: A G C F A D from low to high. It is Drop C with the 6th string dropped down to A, which gives a 6-string guitar some of the low range of a 7-string.

What is AGCFAD tuning?

From standard tuning, the 6th string drops three and a half steps from E to A, and the other five strings each drop a whole step to G, C, F, A and D. Those top five strings are the same as Drop C, so your usual shapes still work there.

Misha Mansoor came up with it on vacation as a way to get extended range on a 6-string. The strings relate like a 7-string with its 6th string missing, so the open 6th string and the 2nd fret of the 5th string make an octave. Mark Holcomb thinks of it as B A D G B E tuned down a whole step, which makes the riffs easier to read.

AGCFAD tuning notes

AGCFAD from the thickest string to the thinnest is A G C F A D. The frequencies are for standard pitch, A4 = 440 Hz.

StringNoteFrequency
6th (thickest)A155.00 Hz
5thG298.00 Hz
4thC3130.81 Hz
3rdF3174.61 Hz
2ndA3220.00 Hz
1st (thinnest)D4293.66 Hz

How to tune to AGCFAD

Start from standard tuning (E A D G B E) and change 6 strings:

  1. Lower the 6th string (E) three and a half steps to A.
  2. Lower the 5th string (A) a whole step to G.
  3. Lower the 4th string (D) a whole step to C.
  4. Lower the 3rd string (G) a whole step to F.
  5. Lower the 2nd string (B) a whole step to A.
  6. Lower the 1st string (E) a whole step to D.

The tuner at the top of this page is already set to AGCFAD. Press the mic button, play each open string and let it ring, then turn the tuning peg until the string lights up green. When you lower a string, go a little below the note and tune back up to it so it stays in tune.

Why guitarists use AGCFAD

  • Some 7-string range on a regular 6-string.
  • An octave between the open 6th string and the 2nd fret of the 5th string.
  • The top five strings are the same as Drop C.

Guitarists who play in AGCFAD

Periphery have used AGCFAD on songs across several albums.

Misha Mansoor

“Muramasa” Periphery, 2012

Mansoor says Muramasa from Periphery II is in AGCFAD, which the band calls the Zyglrox tuning after their earlier song Zyglrox.

Mark Holcomb playing guitar on stage

Mark Holcomb

“Prayer Position” Periphery, 2016

Holcomb plays Prayer Position from Periphery III in A G C F A D, which he thinks of as B A D G B E tuned down a whole step.

Photo: BenCohen83xx, CC BY-SA 4.0, cropped

Related guitar tunings

AGCFAD tuning FAQ

How do I tune to AGCFAD tuning?

Start from standard tuning (E A D G B E). Lower the 6th string (E) three and a half steps to A. Lower the 5th string (A) a whole step to G. Lower the 4th string (D) a whole step to C. Lower the 3rd string (G) a whole step to F. Lower the 2nd string (B) a whole step to A. Lower the 1st string (E) a whole step to D. The tuner on this page is already set to AGCFAD, so play each string and turn it until it lights up green.

How do I get back to standard tuning?

Raise the 6th string from A back to E. Raise the 5th string from G back to A. Raise the 4th string from C back to D. Raise the 3rd string from F back to G. Raise the 2nd string from A back to B. Raise the 1st string from D back to E. Or pick Standard under the tuner and tune each string until it turns green.

How is AGCFAD different from Drop A?

Drop A on a 6-string is A E A D F# B, with every string tuned down. AGCFAD keeps the top five strings in Drop C (G C F A D) and only takes the 6th string down to A.

Is AGCFAD the same as the Rusty Cage tuning?

It is the same shape, a whole step lower. The Rusty Cage tuning is B A D G B E. Lower every string a whole step and you get A G C F A D.