Nashville Tuning

Mic off

Nashville E A D G B E

Uses your microphone. Nothing is recorded or sent anywhere.

Tuning

Pitch

Normal

Strings

Detect string

A4 calibration

440Hz
  • Space Start / stop
  • 1-6 Play a string
  • A Auto detect

Nashville tuning, also called high-strung tuning, uses the same note names as standard tuning, but the four lowest strings sound an octave higher. It turns a regular six-string into a bright, shimmering guitar that sounds like the top half of a 12-string.

What is Nashville tuning?

You do not get there by tuning your regular strings up, which would snap them. Instead you swap the 6th, 5th, 4th and 3rd strings for the thin octave strings from a 12-string set and tune them to E, A, D and G an octave above standard. The 2nd and 1st strings stay normal B and E, so your 3rd string ends up as the highest note on the guitar.

Chord shapes stay the same as standard tuning, but with no low bass notes every chord sounds light and sparkly. That makes Nashville tuning a studio favorite, layered under a normal guitar for shimmer. Kansas did that on Dust in the Wind, and a Nashville-tuned guitar sits in the band mix on Taylor Swift's Love Story.

Nashville tuning notes

Nashville from the thickest string to the thinnest is E A D G B E. The frequencies are for standard pitch, A4 = 440 Hz.

StringNoteFrequency
6th (thickest)E3164.81 Hz
5thA3220.00 Hz
4thD4293.66 Hz
3rdG4392.00 Hz
2ndB3246.94 Hz
1st (thinnest)E4329.63 Hz

How to tune to Nashville

Tune each open string to the notes above, from the thickest string to the thinnest.

The tuner at the top of this page is already set to Nashville. Press the mic button, play each open string and let it ring, then turn the tuning peg until the string lights up green. Tune up slowly, a little at a time, and give the string a moment to settle.

Why guitarists use Nashville

  • A bright, shimmering sound like a 12-string with only six strings.
  • Every chord shape from standard tuning still works.
  • Layers beautifully under a normal acoustic in recordings.

Guitarists who play in Nashville

These recordings get their sparkle from a Nashville-tuned guitar.

David Gilmour playing guitar on stage

David Gilmour

“Hey You” Pink Floyd, 1979

Gilmour used a high-strung acoustic on Hey You, swapping the low E for a second high E two octaves up.

Photo: Jean-Pierre Jeannin, CC BY-SA 2.0, cropped

Taylor Swift singing on the Eras Tour

Taylor Swift

“Love Story” 2008

A Nashville-tuned guitar is layered into the band mix on Love Story for extra top-end shimmer.

Photo: Paolo V, CC BY 2.0, cropped

Rich Williams playing guitar on stage

Rich Williams

“Dust in the Wind” Kansas, 1977

Williams double-tracked the fingerpicked part, adding a high-strung Nashville-tuned guitar for sparkle.

Photo: Matt Barr, CC BY-SA 3.0, cropped

Related guitar tunings

Nashville tuning FAQ

How do I tune to Nashville tuning?

Play each open string, from the thickest to the thinnest, and turn its tuning peg until the tuner lights up green. The notes are E A D G B E from low to high.

What strings do I need for Nashville tuning?

Use the thin octave strings from a 12-string set for the 6th, 5th, 4th and 3rd strings, and regular B and E strings for the 2nd and 1st. Some string makers also sell ready-made Nashville or high-strung sets.

Can I play my usual songs in Nashville tuning?

Yes. The note names and chord shapes are the same as standard tuning, so everything plays the same way. It just sounds higher and lighter, because the low bass notes are gone.